Moving truck graphics are the vinyl lettering, partial graphics or full wraps that turn a plain box truck into a moving advertisement. For a moving company, the right choice is usually a designed wrap or partial wrap, with the legally required USDOT lettering built into the layout, printed on premium cast film and installed indoors by one shop that handles design, printing and installation. That is how we build them at NJ Vinyl Wrapz in Tinton Falls, and this guide covers what to choose, what to put on the truck and how to keep it looking sharp. Call us at (732) 486-1000 if you would rather talk it through.
TL;DR
- Lettering carries your name, phone number and required numbers. A partial wrap adds color and branding on key panels. A full wrap covers the whole box and gives you the most advertising space.
- A readable wrap leads with the company name, phone number, a simple web address and one call to action. Keep the design uniform across every truck.
- If your truck falls under federal rules, your legal or trade name and USDOT number must be on both sides in contrasting letters, readable from 50 feet.
- Premium cast vinyl from 3M or Avery Dennison, installed in a climate-controlled shop, is what protects the look over years of road salt, sun and loading-dock scrapes.
- Wash weekly, avoid harsh chemicals, and park indoors when you can.
Table of Contents
- What counts as moving truck graphics
- Why a moving truck is such a strong advertising surface
- Wrap, partial wrap or lettering: choosing for a moving company
- What to put on a moving truck
- USDOT and licensing marks: build them in from the start
- How materials and installation shape how long a wrap lasts
- Caring for a moving truck wrap
- What a moving truck wrap costs
- How we do it at NJ Vinyl Wrapz
- Our perspective
- FAQ
- Sources
What counts as moving truck graphics
Three terms get used loosely, so here is how a wrap shop uses them.
Lettering is individual letters and numbers cut from solid-color vinyl. It carries your company name, phone number, license numbers and the USDOT number. It is the lowest-commitment option and the base that every moving truck needs.
Decals and spot graphics are smaller printed or cut pieces placed on chosen spots, such as a logo on the cab doors or a slogan above the rear door.
Wraps are large printed vinyl sheets applied over the body. A partial wrap covers selected areas, for example the lower half of the box and the cab doors. A full wrap covers the whole box side to side, including the rear door if you choose. You can see the options on our wrap options page.

The search terms “moving truck graphics,” “moving truck wrap” and “moving truck advertising” all point at the same idea: a box truck is a 20-plus-foot billboard that is already on the road every working day. The question is how much of that billboard you want to use.
Why a moving truck is such a strong advertising surface
Movers are unusual among local service businesses. Your truck sits in a customer’s driveway for hours, parks on a residential street in front of the neighbors, and travels between towns all day. People who may need a mover in six months see your name while you work.
The trucking industry has measured how much exposure that creates. Heavy Duty Trucking reports that an American Trucking Associations study found a typical trailer wrap generates about 10 million impressions a year, and about 16 million for local delivery vans. The same article cites surveys in which 97% of people noticed fleet-vehicle advertising and 29% said they would base a buying decision on it. These are industry figures from 2017 and they describe vehicles in general, so treat them as a sense of scale, not a forecast for your route.
3M, the film manufacturer, says in its fleet graphics guidance that reflective graphics can boost impressions by up to 40 percent compared with traditional graphics. For a mover whose trucks are also seen at dusk and early morning, that is worth asking about when you plan the design.
Wrap, partial wrap or lettering: choosing for a moving company
| Option | What it does | Best fit |
|---|---|---|
| Vehicle lettering | Name, phone, USDOT and license numbers in cut vinyl | Meeting the marking rules, a starting point for a new company |
| Partial wrap | Printed branding on the sides, cab or rear, with the truck color showing elsewhere | Companies that want strong branding at a moderate scope |
| Full wrap | Entire box covered in a designed, printed graphic | Companies that want maximum visibility and a fleet that looks identical |
For a growing moving company, we recommend designing the truck as a full or partial wrap from the start and building the lettering into it. A truck with a unified design looks like an established company. A truck with mismatched lettering can look like a one-off, even if you have run for twenty years.
If you run more than one truck, consistency matters more than any single design choice. 3M’s guidance is to keep themes, colors and images consistent across the fleet to build recognition. Our fleet wraps page explains how that works across several vehicles, and our box truck and trailer wraps page covers the vehicle types movers use most.
What to put on a moving truck
A moving truck is read in two seconds from a passing car, so the design has to be simple. SmartMoving’s wrap guidance, written for movers, boils it down to a few rules we agree with: keep it readable at traffic speed, check it from 100 feet away, brand every truck the same way and pick bright colors.
Here is how we translate that into a layout.
- Company name, large. It should be the first thing read on the side of the box. A logo alone is not enough if nobody knows your name yet.
- One phone number. Put it big and in high contrast. People call from the passenger seat or write it down at a red light.
- A short web address. Use one that is easy to remember after a single glance.
- One call to action. “Free estimates” or “Local and long distance” works. Three taglines do not.
- Required numbers. USDOT and any license numbers get their own legible space in the layout, not an afterthought squeezed into a corner.
- Space to grow. If you may add a second location or a new service such as storage or packing, leave room so the design can scale without a full redo.
Color and contrast
Bright colors are easier to spot in traffic, and SmartMoving notes that they tend to fade more slowly in the sun than dark ones. Contrast between text and background matters more than the palette. White or yellow lettering on deep blue reads well; mid-tone on mid-tone does not. Our vehicle wrap color scheme examples show how fleets use color to hold attention.
Using the whole box
The box is a large, flat surface, which is the easiest kind to wrap and the best for readable type. Put the phone number and name on the driver and passenger sides, and use the rear door for a short message and your web address, since that is what a driver sees when stuck behind you. Our ROI guide to wrap designs for business fleets goes deeper on what makes a design pay.
USDOT and licensing marks: build them in from the start
This is the part of moving truck graphics that is regulated, so plan it before you approve a design.
Under 49 CFR 390.21, a commercial motor vehicle subject to the federal motor carrier rules must display the carrier’s legal name or trade name and the USDOT number, preceded by the letters USDOT, on both sides. The letters must contrast sharply with the background, be readable from 50 feet while the vehicle is stationary, and be kept in a readable condition. The markings can be painted on or applied as a removable device, which includes vinyl.
Whether your truck is covered depends on its weight, the cargo and whether you cross state lines. Movers of household goods in New Jersey also work under the state’s Public Movers and Warehousemen Licensing Act, which regulates who may operate as a mover in the state. Check your own requirements with the FMCSA and the New Jersey Division of Consumer Affairs, then give us the numbers and format you need. We handle DOT numbers and vehicle lettering as part of our core work, so they go on cleanly and in the right size.
One practical point: if the numbers are part of a full wrap, a wrap that gets damaged or replaced can take your required markings with it. Keep them readable, and re-check them whenever you repair or replace a panel.
How materials and installation shape how long a wrap lasts
A moving truck lives a hard life. It sees road salt, summer heat, tight alleys, loading ramps and furniture pushed against the walls. Two choices decide whether the wrap still looks good in year four: the film and the installation conditions.
Film. We use 3M and Avery Dennison cast vinyl. Cast film is made to conform to curves, rivets and corrugated areas, and it holds color well. The manufacturer’s warranty for the material depends on the product, for example printed wrap film versus color change film, so ask us which one applies to your project.
Installation environment. Heavy Duty Trucking’s article on fleet graphics explains that installation should happen indoors in a clean, dust-free, temperature-controlled space, because dust causes bumps under the graphic and vinyl that is too hot or too cold does not adhere correctly. Our design, printing and installation all happen in-house at our climate-controlled facility in Tinton Falls.

Warranty. Every installation carries our 1-year labor warranty, and the film manufacturer provides the material warranty.
Caring for a moving truck wrap
Moving trucks get dirty fast, and dirt hides your phone number. The care routine that Heavy Duty Trucking describes is simple:
- Wash the truck about once a week.
- Avoid strong chemicals and waxes.
- Clean off salt and ice quickly, which matters in a New Jersey winter.
- Park indoors when you can to limit UV exposure.
3M also points out that neglected, dirty graphics create a negative impression of the brand, which for a mover handling a customer’s belongings is not a small thing. Over time, a wrap may need a repair or replacement, and removing an old wrap at the end of a vehicle’s life is a professional job, so plan for it when you budget.
What a moving truck wrap costs
There is no single price, because the quote depends on truck length, how much of the box is covered, how much design work is needed, the film you select, and how many trucks you wrap. We do not publish a price list; we quote each project after we know the vehicles and the design.
What we can say is how to think about it. Deborah Scott of Riveting Wraps told Heavy Duty Trucking that the main hurdle for fleets is that the cost comes all at once, while the benefit accrues over the five to seven years the vehicle is on the road. That is the right frame: you buy the wrap once and the truck advertises on every job.
For fleets, we offer volume discounts, and we can phase installs so most of your trucks stay working while others are being wrapped. A typical install takes one to three days per vehicle. We also keep your design files on record, so adding a new truck later is a quick reorder instead of a new project.
How we do it at NJ Vinyl Wrapz
If you run a moving company in Monmouth, Ocean or Middlesex County, from Freehold and Red Bank to Toms River, you can bring a truck to our shop at 3212 Shafto Rd, Units 10 and 11, in Tinton Falls. We work Monday to Saturday, 9am to 5pm. Our delivery and moving truck wraps page shows the kind of work we do for the trade.
Because design, printing and installation are in one building, the person who drew your phone number at the right size is the same team that prints and applies it. That keeps the layout, the DOT lettering and the finished truck consistent with each other, without anything getting lost between a designer, a printer and an installer.

If you want a quote for one truck or a whole fleet, request a free quote or call (732) 486-1000. Our full vehicle wraps and partial wraps pages explain the choices before you call.
Our perspective
Most moving company owners come to us with a truck that already works hard and a logo that was never designed for a 20-foot wall. The fix is rarely more graphics. It is fewer, larger elements: the name, the phone number and one clear message.
We design every wrap around how a truck is actually seen, from a car length back, at speed, in the rain. Then we build the required USDOT and license lettering into that layout so it is legible and looks like it belongs.
Because we print and install in our own climate-controlled shop with 3M and Avery Dennison cast vinyl, we control the whole result. Add a 1-year labor warranty and design files kept on record for reorders, and a second or tenth truck matches the first.
Your trucks are in front of customers every working day. We think they should look like the company you run.
NJ Vinyl Wrapz
FAQ
Is a wrap better than lettering for a moving truck?
For most moving companies, yes. Lettering covers the essentials, but a wrap or partial wrap uses far more of the box as advertising space and makes a fleet look uniform. Lettering is still part of the design, since your name, phone number and required numbers need to stay clear and readable.
How long does it take to wrap a moving truck?
Our typical install is one to three days per vehicle. For a fleet, we can phase the work so most of your trucks stay on the road while a few are in the shop.
Do I need USDOT numbers on my moving truck?
If your truck is covered by federal motor carrier rules, 49 CFR 390.21 requires the legal or trade name and USDOT number on both sides in contrasting letters readable from 50 feet. Check your status with the FMCSA, then tell us what you need and we will place the lettering correctly in your design.
How do I keep a moving truck wrap looking good?
Wash it about once a week, avoid strong chemicals and waxes, clear off road salt and ice quickly, and park indoors when possible. Quality cast vinyl installed in a controlled environment gives the wrap the best start.
Can you wrap several trucks without taking them all off the road?
Yes. We offer phased installs for fleets so most vehicles keep working, and fleet volume discounts. Call (732) 486-1000 to plan a schedule.
Sources
- Importance of Mobile Truck, Van Marketing, Heavy Duty Trucking
- Get the Most From Vehicle Graphics, 3M
- Truck Wraps That Sell: Do This, Not That, SmartMoving
- 49 CFR 390.21, Marking of self-propelled CMVs
- Public Movers and Warehousemen Licensing Act, NJ Division of Consumer Affairs

