Perforated window graphics are printed vinyl films with thousands of tiny holes. People outside see your artwork. People inside look out through the holes. For a contractor’s van, a box truck, a food truck or a retail storefront, that means glass becomes advertising space without blocking the view. The film spec, the glass and the installation decide whether the graphic looks sharp for years or peels at the edges in the first winter. At NJ Vinyl Wrapz in Tinton Falls, we design, print and install window graphics in-house for New Jersey businesses. You can reach us at (732) 486-1000.
TL;DR
- Perforated film (also called window perf, one-way vision film or see-through window graphics) shows a full-color graphic outside and keeps visibility from inside.
- For vehicles, Avery Dennison says to use the 50/50 pattern. The 65/35 pattern has a larger print area but is not meant for vehicle applications.
- Daytime is where the effect works best. When it is dark outside and lit inside, the graphic becomes easier to see through.
- Wet application, the wrong glass cleaner and unsealed edges are the common causes of failure, which is why installation matters as much as the print.
- We handle design, printing and installation in one New Jersey shop, and every install carries a 1-year labor warranty.
Table of Contents
- What perforated window graphics are
- Where businesses use it
- How well can you see through it?
- Rules for vehicle windows
- What a proper installation involves
- Printing and film choices
- Design tips for see-through graphics
- Care and removal
- How we do it: perforated graphics at NJ Vinyl Wrapz
- Get your windows quoted
- FAQ
- Sources
What perforated window graphics are
Avery Dennison’s installation bulletin defines perforated window film as a film with a continuous hole pattern cut into the face material. The graphic is visible from one side and see-through from the other. You will see the same product called window perf, perforated window decals, one-way vision graphics or see-through window graphics. These are all names for the same thing.
The optical effect comes from two layers working together. The printed face is bright. The adhesive side is black. Avery’s wrap training material explains that the tiny holes and the black adhesive let people inside see out while people outside see only the printed graphic. Your eye reads the black backing as a dark screen, so the holes seem to disappear from the inside.
That is also why perforated film is the standard way to cover rear and some side glass on a full wrap. The wrap flows across the windows instead of stopping at the glass line.
Where businesses use it
Work vans and box trucks. A rear window graphic on a van turns the biggest flat surface at the back of the vehicle into a billboard. For HVAC, plumbing, electrical and landscaping crews around Monmouth, Ocean and Middlesex counties, the rear of the truck is what the driver behind you stares at on Route 18 or the Parkway. A full-color logo, service list and phone number fit there.
Fleet wraps. On a fleet, consistency is the point. Perforated film lets the design run across the rear and rear side glass so every vehicle looks finished. If you are planning a fleet, our fleet wraps page covers how we phase installs so most vehicles stay on the road.
Food trucks and delivery vehicles. Serving windows and rear glass carry menus, branding and social handles. Perf adds color while keeping some light and outward visibility.
Storefronts and offices. Retail shops, restaurants and offices in places like Freehold, Red Bank and Toms River use perf on large glass to promote a sale or brand without turning the room into a dark box. It also softens glare and gives a measure of daytime privacy. Our window graphics service covers storefront and office glass, and the retail and office graphics page shows how we approach those spaces.
How well can you see through it?
Two numbers describe the film. The first is the open area, the share of the surface that is hole. A 50/50 pattern is half printed face and half holes. A 65/35 pattern prints on 65% of the surface and leaves 35% open. That gives richer color but less see-through.
Avery’s vehicle training states that for vehicles 50/50 should always be used. The IB610 bulletin makes the same point about its 65/35 product, which it says is not for vehicle applications. The 65/35 pattern suits storefront glass where nobody is driving through it.

The second number is visible light transmission, or VLT: how much light passes through. As a real example, Avery’s MPI 2509 data sheet lists a white print face with a black adhesive side, 2 mm holes, 50% open area and a VLT of 37.5%. Different films have different numbers, so the spec belongs in the quote conversation for any vehicle.
Can you see through it at night?
The effect depends on the light. The graphic hides the inside when the outside is brighter than the inside, which is normal in daylight. After dark, with interior lights on, the balance flips and people outside can see in more easily. At night, with the lights off inside, the graphic still reads from the street and you can still see out through it. Keep this in mind when you pick a window: a storefront that is lit all evening is a different case from a van that parks at night. If privacy after dark is your goal, tell us when we plan the job so we can recommend the right approach for that glass.
Rules for vehicle windows
Film on a vehicle window is a legal question as well as a design one. States regulate what can sit on windshields and side windows, and the details differ. Illinois, for example, allows a perforated window screen behind the driver only when the windows next to the driver have no treatment and the vehicle has a conforming side mirror on each side. Montana limits light transmission on front side windows and rear windows to set minimums. Those are two examples of how specific the rules get.
For New Jersey fleets, the practical rule is to keep perforated film off the windshield and the driver and front passenger windows, and to confirm requirements with the state before you wrap. If your vehicles cross into New York or Pennsylvania, check each state’s rules. We cover this topic for owners and fleets in our guide to staying legal with window perf. For tint on the same vehicles, see window tinting and our explainer on tint percentages.
What a proper installation involves
Perf is less forgiving than a standard printed wrap. Avery’s training material notes that the film is prone to overstretching and tearing and that on a full wrap it is the last section installed, after the windows have been wiped down. Here is what a correct job looks like, so you know what you are paying for.
- Surface prep. Avery’s bulletin calls for cleaning the glass with isopropyl alcohol, never Windex or ammonia-based cleaners. Residue from the wrong cleaner is a common reason for adhesion trouble. It also warns that low surface energy coatings such as silicone can cause loss of adhesion, and that glass with abrasion-resistant or anti-reflection coatings can be damaged when overlaminated perf is removed. Glass condition is worth discussing before the install.
- Positioning. The panel is placed with low-tack tape as a hinge, so it is aligned before it ever touches the glass.
- Dry application. The bulletin tells installers to avoid wet application, because water trapped in the holes obscures vision. A squeegee with a non-abrasive sleeve works from the middle outward.
- Seams. Panels are butt-seamed edge to edge, without overlap.
- Edge sealing. All exposed edges and seams get edge sealer applied with a 0.25 in. (6 mm) brush, which keeps moisture out of the holes and edges.
- Temperature and cure time. Continental Grafix’s handling guide gives an application range of at least 50°F and no more than 86°F, and says to leave a vehicle at least 12 hours at room temperature after application. For cold weather it advises waiting up to 24 hours before exposing the film to the cold.
That last step is where a New Jersey winter matters. Our work is done in a climate-controlled facility, so a January job gets the same conditions as a June one. If you want the detail on cold-season installs, read our post on wrapping vehicles in winter.
Printing and film choices
Film choice comes down to the surface it goes on and how long it needs to last. The printed perf face is usually a calendered vinyl, and the data sheet for Avery’s MPI 2509 says it prints well on latex, eco-solvent and solvent inkjet printers. It also recommends curing solvent and eco-solvent ink for 5 days before overlaminating or installing. Skipping that cure is an easy way to trap solvent under the laminate and shorten the life of the graphic.
The same data sheet says the film can be removed with heat for up to one year with little or no residue. Plan for that when you set your replacement schedule: a promotion that changes every quarter can use the same glass again and again, which is useful for storefronts running seasonal campaigns.
We print and install with 3M and Avery Dennison films, with design, printing and installation under one roof. A job goes from artwork to finished glass without being handed to a separate print vendor, so there is one team to call if something needs adjusting.
Design tips for see-through graphics
- Use bold shapes and large type. The holes soften fine detail. A phone number in a heavy sans-serif reads from a lane away. Thin script does not.
- Keep contrast high. Because some of the surface is open, a pale logo on a pale background washes out. Dark outlines help.
- Think about the view from inside. Leave the part of the glass the driver uses for mirrors and sightlines clear where the rules or common sense require it.
- Match the rest of the vehicle. The glass should continue the wrap, not look like a separate sticker. Fleet reorders are simpler when your design files are on record, and we keep them for exactly that reason.
- Check the glass shape. Curved rear windows with heavy defroster lines need careful layout so the lines do not break up your message.
Care and removal
Treat perf gently. Continental Grafix advises that high-pressure sprayers and mechanical brush systems in automated car washes can cause edge lifting and graphic failure. Hand-wash the glass with a soft cloth and mild soap and keep a pressure washer’s nozzle away from the edges, where water can force its way into the perforations.
When the graphic reaches the end of its life, removal is done with heat. The manufacturer’s guidance is to remove it at a minimum of 50°F, pulling at a 45° to 75° angle, then clean any residue with mild detergent or adhesive remover and a plastic squeegee. This is a job for the shop that installed it, since scraping or the wrong solvent can mark glass with coatings.
How we do it: perforated graphics at NJ Vinyl Wrapz
We are a commercial wrap shop at 3212 Shafto Rd, Units 10 and 11, in Tinton Falls. We serve businesses across New Jersey, especially Monmouth, Ocean and Middlesex counties. Window graphics fit into our commercial work: fleet wraps, partial wraps, lettering, window, wall and floor graphics, and heavy machinery wraps.
For fleets, the numbers that matter are time and consistency. A typical install runs 1 to 3 days per vehicle, installs can be phased so most of your vehicles stay on the road, and we offer fleet volume discounts. Because we keep your design files on record, adding a truck next year means a reorder, not a redesign.
Every install carries our 1-year labor warranty. Material warranties come from the film manufacturer and vary by product.
For storefronts and offices, see our commercial services for window, wall and floor graphics.
We have wrapped enough rear glass to know that the film is rarely the problem. The problem is a shortcut: the wrong cleaner, a wet install, edges left unsealed, a vehicle sent out into the cold too soon.
Our approach is to keep the whole job in one building. Design, printing and installation happen in-house, in a climate-controlled facility, using 3M and Avery Dennison cast vinyl. That lets us control cure time, temperature and finishing, which is where perf succeeds or fails.
For a fleet manager, we think the best result is a fleet that looks identical from the back, installed in phases so trucks keep earning, and documented so the next vehicle matches the last. That is how we plan every commercial job.
NJ Vinyl Wrapz
Get your windows quoted
If you manage a fleet or a storefront, the quickest path is to tell us the vehicle types, the count and what you want the glass to say. We will recommend where perforated film fits and how to schedule the installs. See our window graphics service and our full wrap options, or call (732) 486-1000. We are open Monday to Saturday, 9am to 5pm.

Ready to price it? Request a free quote and we will get back to you.
FAQ
What are window perfs?
Window perf is vinyl film with a pattern of small holes, printed with a graphic on the outside. The holes and a black adhesive layer let people inside see out while people outside see the artwork. It is used on storefronts, offices and the rear glass of work vehicles.
Can you put perforated graphics on any vehicle window?
Not on every window. Windshields and front side windows are restricted by state law, and rules differ from state to state. Rear and rear side glass are the usual spots, using 50/50 film. We lay out each job around the rules and the vehicle, and our guide to window perf legality explains more.
How long does installation take?
Our typical install time is 1 to 3 days per vehicle, depending on the scope. Window graphics alone are a smaller part of that. On fleets we can phase installs so most vehicles stay on the road.
Can I wash a vehicle with perforated graphics?
Yes, with care. Use a soft cloth and mild soap by hand, and avoid high-pressure sprayers and automated car washes with mechanical brushes, which can lift edges. Give new graphics time to cure before the first wash, following the guidance your installer gives you.
Sources
- Guide to Perforated Window Graphics Films (Avery Dennison IB610)
- Avery Dennison wrap training study guide
- MPI 2509 PWF product data sheet
- panoRama perforated window films handling recommendations
- Illinois 625 ILCS 5/12-503
- Montana Code 61-9-405

